The world is altering for the pits, but atleast the people from the biking world can swank of a contrary notion. The concepts, which have evolved over the past few years, are definitely heart warming and since we people have the tendency to forget, let us just rev up and see the stunning concepts that have made an impact and left a lasting impression.

10. The SAGA

saga_59
Designer: Paul Yang and Larry Nagel
Status : Project Motorcycle
Credibility: It was a first time project, which only took seven months for completion


Dreamworks - Saga - video powered by Metacafe

Paul Yang wasn’t a designer by profession and he merely fluked it to join hands with the famous Larry Nagel but the amateur status of Paul did not prove to be a hindrance by any means. Indeed, a first time project bike conventionally takes 18 to 24 months for completion and these two managed to produce a moving guzzler mere seven months which talks highly about the efficiency and dedication of this Duo .

9. Chrysler Tomahawk

chrysler-tomahawk_59
Designer: Daimler Chrysler
Status: Production ready
Engine: V 10
Credibility: A sculpture that can be ridden


Download video!

Chrysler Tomahawk for me is the ‘Big Daddy’ of all motorcycles. You ask me a reason and I have one many; for a V10 engine, which makes it capable of producing 500 horses powers it, is the foremost of them all. With a capacity of 8.3 liters and a ten-cylinder engine, it can literally fly at 400 mph. Hats off to Daimler Chrysler for making this bike reach the production floor !

8. Peraves Monotracer

peraves-monotracer-image-2_59

Designer: Swiss Manufacturer Peraves
Status : Being limitedly produced (100 units each year)
Engine: BMW 1200 CC, 130 hp
Credibility: Combines the aptitude of a car and a bike

peraves-monotracer-image-1_59

The Peraves Monotracer combines the features of a sports bike and a sports car and if any of you doubt it, just as a substantiation, it took Peraves some 90 prototypes and 12 million kilometers to be sure that they live up to the rumored repute . When the driver dives into a corner a retractable stabilizer wheel is positioned in less than a half a second, enabling the bike to lean up to 52 degrees more, than most sport bikes in their lifetime.

7. BMW IMME 1200

bmw-imme-1200_59

Designer : Nicolas Bubar and Yves Dufeutrelle from ISD
Status: Prototype
Engine : A 150 hp engine based on the BMW 1200 Boxer
Credibility: A startling concept evolved by two rookie designers
bmw-imme-1200-image-2_59

Nicolas Bubar (22) and Yves Dufeutrelle (24) are design students at the international school of design and they thought that a sports bike based on the BMW 1200 boxer would be good idea. Tell you what folks; it definitely was a good idea for the IMME 1200 would now be presented at the next Munich Motorcycle Show at BMW stands.

6. The Dacoit

dacoit_59

Designer: Nitin Khosa
Status: Concept bike
Credibility: Devil Personified

dacoit-image-2_59

Nitin Khosa designed this amazing concept to satiate a thirty plus individual who was looking to redeem his attitude and youth with a stunning, aggressive, and evil looking bike. Khosa answered his cause by creating the Dacoit (a class of robbers in India who act in gangs and are usually armed and dangerous). The face of the bike depicts an evil figure whose eyes/headlights are peeping from underneath the hood.

5. The Embrio

embrio-image-1_59

Designer: Canadian multinational Bombardier
Engine : Complex hydrogen fuel cell
Status : Prototype
Credibility: Single wheeled, emits only water vapor

embrio-image-2_59

The Embrio from Bombraider is a prototype, which could become a virtual reality somewhere around 2025 for this technology is too ultramodern considering the present generation bikes. It sports a single wheel and is powered by a hydrogen fuel cell, which creates power by mixing hydrogen and oxygen, creating only water as a by-product.

4. The Renovatio

renovatio-image-1_59

Designer : Ed Jacobs
Engine: 135 hp, V-twin engine, specially designed by Katech
Status : Pre -Production
Credibility: Easy to upgrade and reconfigure

renovatio-image-2_59

Confederate Motorcycles lead designer Ed Jacobs designed this drastic bike concept with large attachment points easily available on the engine ensuring improvements and assorted configurations at ease. Powered by a V-Twin engine, it produces 135 hp at 125ft/lbs of torque. Confederate is confident about this unique concept it has developed and it plans to produce it some time this year.

3. The V-Rex

v-rex1_48_59
Designer : Tim Cameron
Engine: Harley Davidson Revolution V-Twin engine
Status : Being Mass-Produced
Credibility : It took a leap from the computer screen to metal and rubber
v-rex2_48_59
For Tim Cameron, the Australian designer of this bike, it was a mere ‘dream bike’ for he thought dreams were the only place where he would ride it, but as they say destiny drives us all, this bike had to become a reality. Tim Cameron’s dream were given realistic proportions by the 200mph ‘Y2K’ jet turbine-powered bike fame Christian Travert and now the experts dub it as the most startling motorcycle design ever seen .

2. The Hyanide

hyanide_59
Designer : Oliver Keller and Tillman Schlootz
Engine: 60hp, 500cc liquid-cooled single-cylinder
Status : One fifth of a scale model / currently not going into production
Credibility : Potent for any terrain, courtesy of its flexible rubber treads
hyanide-image-2_59

Designed for last years Michelin Design Challenge, the Hyanide impressed on and all with its amazing ability to conquer any terrain. Its flexible rubber treads could pull the machine through, even if its slightest part is touching the ground. We have had no news of it since then but we are just hoping that the Germans decide to send it to the production floor.

1. Detonator V4 6.0

detonator-v4-image-1_59
Designer : Daniel Simon
Engine: 6 liter, 4 Cylinder
Status: Concept/Sculpture
Credibility: Bears no semblance to any existing concepts
detonator-v4-image-2_59
The, ‘too hot to handle’, Detonator V4 6.0, is a mere sculpture with no intention of being a functional bike. This machine looks like a crossover between a chopper and an automotive soldered android and hmmm! It reminds me of those big pizza cutters.